knpc添加电压字段
This commit is contained in:
wangshilong
parent
b351dd4475
commit
d56fe465d7
|
|
@ -33,6 +33,7 @@ public class Knpcv1PersistenceHandler extends AbstractPersistenceHandler {
|
|||
KNPC_V1_COLUMN_MAPPING_MAP.put("liquid_level", "liquidLevel");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("temperature", "temperature");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("humidity", "humidity");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("battery_Voltage", "batteryVoltage");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("op_mode", "opmode");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("timer_able1", "timer1");
|
||||
KNPC_V1_COLUMN_MAPPING_MAP.put("timer_able2", "timer2");
|
||||
|
|
@ -140,6 +141,7 @@ public class Knpcv1PersistenceHandler extends AbstractPersistenceHandler {
|
|||
Knpcv1PersistenceHandler.this.setValue(ps, newRow, 51, "tpClosePressure", Types.INTEGER);
|
||||
Knpcv1PersistenceHandler.this.setValue(ps, newRow, 52, "tpCloseTime", Types.VARCHAR);
|
||||
Knpcv1PersistenceHandler.this.setValue(ps, newRow, 53, "tpStabilityTime", Types.INTEGER);
|
||||
Knpcv1PersistenceHandler.this.setValue(ps, newRow, 54, "batteryVoltage", Types.DECIMAL);
|
||||
return ps.executeUpdate();
|
||||
}
|
||||
});
|
||||
|
|
@ -153,5 +155,5 @@ public class Knpcv1PersistenceHandler extends AbstractPersistenceHandler {
|
|||
protected Map<String, String> getColumnMappingMap() {
|
||||
return KNPC_V1_COLUMN_MAPPING_MAP;
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,86 @@
|
|||
INSERT INTO `command_points` (`id`, `command_id`, `field`, `name`, `details`, `start_address`, `step_size`, `factor`, `precision`, `use_hex`, `byte_order`, `format`, `decode_name`)
|
||||
VALUES (10055, 10001, 'batteryVoltage', '电池电压', '单位： V, *100', 22, 11, 100.00, 2, NULL, NULL, NULL, 'factor');
|
||||
|
||||
-- 77台设备
|
||||
select concat('ALTER TABLE `t_device_data_', id, '` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT \'电池电压：单位V, *100\' AFTER `humidity`;') add_sql from device where product = 4;
|
||||
|
||||
ALTER TABLE `t_device_data_10` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_224` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_226` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_228` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_229` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_230` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_231` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_240` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_251` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_254` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_264` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_265` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_270` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_274` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_275` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_282` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_284` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_285` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_286` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_287` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_306` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_307` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_308` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_309` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_316` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_335` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_337` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_339` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_342` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_344` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_345` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_346` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_347` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_348` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_353` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_354` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_355` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_356` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_357` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_358` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_359` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_360` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_361` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_362` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_374` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_375` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_376` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_377` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_378` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_379` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_380` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_381` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_382` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_383` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_386` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_387` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_388` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_389` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_390` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_391` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_392` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_393` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_394` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_395` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_398` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_414` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_415` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_416` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_417` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_418` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_427` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_433` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_434` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_435` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_436` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_438` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
ALTER TABLE `t_device_data_889` ADD COLUMN `battery_voltage` decimal(10, 2) NULL COMMENT '电池电压：单位V, *100' AFTER `humidity`;
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,16 +1,16 @@
|
|||
CREATE TABLE `$TableName$`
|
||||
(
|
||||
`id` bigint NOT NULL COMMENT '主键',
|
||||
`device_id` int NOT NULL COMMENT '设备标识',
|
||||
`created_time` datetime NOT NULL COMMENT '数据落库时间',
|
||||
`collection_time` datetime NOT NULL COMMENT '采集指令下发时间',
|
||||
`receive_time` datetime NOT NULL COMMENT '接收到数据时间',
|
||||
`device_time` datetime NULL DEFAULT NULL COMMENT '设备时间。\r\n寄存器地址：3:0000，3:0001，3:0002，3:0003，3:0004，3:0005\r\n',
|
||||
`run_mode` smallint NULL DEFAULT NULL COMMENT '运行模式：\r\n0：手动模式 \r\n1：定时器模式 \r\n2：计时器模式 \r\n3：压力模式\r\n4：柱塞模式\r\n5：时压模式',
|
||||
`well_status` smallint NULL DEFAULT NULL COMMENT '气井状态：\r\n0：关闭 \r\n1：打开',
|
||||
`plug_status` smallint NULL DEFAULT NULL COMMENT '柱塞状态：\r\n0：离开\r\n1：上升中\r\n2：到达',
|
||||
`status_start_time` varchar(10) NULL DEFAULT NULL COMMENT '当前状态开始时间',
|
||||
`status_end_time` varchar(10) NULL DEFAULT NULL COMMENT '当前状态结束时间',
|
||||
`id` bigint NOT NULL COMMENT '主键',
|
||||
`device_id` int NOT NULL COMMENT '设备标识',
|
||||
`created_time` datetime NOT NULL COMMENT '数据落库时间',
|
||||
`collection_time` datetime NOT NULL COMMENT '采集指令下发时间',
|
||||
`receive_time` datetime NOT NULL COMMENT '接收到数据时间',
|
||||
`device_time` datetime NULL DEFAULT NULL COMMENT '设备时间。\r\n寄存器地址：3:0000，3:0001，3:0002，3:0003，3:0004，3:0005\r\n',
|
||||
`run_mode` smallint NULL DEFAULT NULL COMMENT '运行模式：\r\n0：手动模式 \r\n1：定时器模式 \r\n2：计时器模式 \r\n3：压力模式\r\n4：柱塞模式\r\n5：时压模式',
|
||||
`well_status` smallint NULL DEFAULT NULL COMMENT '气井状态：\r\n0：关闭 \r\n1：打开',
|
||||
`plug_status` smallint NULL DEFAULT NULL COMMENT '柱塞状态：\r\n0：离开\r\n1：上升中\r\n2：到达',
|
||||
`status_start_time` varchar(10) NULL DEFAULT NULL COMMENT '当前状态开始时间',
|
||||
`status_end_time` varchar(10) NULL DEFAULT NULL COMMENT '当前状态结束时间',
|
||||
`oil_pressure` decimal(10, 2) NULL DEFAULT NULL COMMENT '油压：单位Mpa',
|
||||
`cas_pressure` decimal(10, 2) NULL DEFAULT NULL COMMENT '套压：单位Mpa',
|
||||
`pre_pressure` decimal(10, 2) NULL DEFAULT NULL COMMENT '输压：单位Mpa',
|
||||
|
|
@ -18,42 +18,43 @@ CREATE TABLE `$TableName$`
|
|||
`liquid_level` decimal(10, 2) NULL DEFAULT NULL COMMENT '流量：单位mm',
|
||||
`temperature` decimal(10, 2) NULL DEFAULT NULL COMMENT '温度：单位℃，*100，最高位表示正负，0正1负，即零下的温度加32768',
|
||||
`humidity` decimal(10, 2) NULL DEFAULT NULL COMMENT '湿度：单位%',
|
||||
`op_mode` smallint NULL DEFAULT NULL COMMENT '运行模式：\r\n0： 手动模式 hand_mode\r\n1：定时器模式 timer_mode\r\n2：计时器模式 t2mode\r\n3：压力模式 pressure_mode\r\n4：柱塞模式 piston_mode\r\n5：时压模式 tp_mode',
|
||||
`timer_able1` smallint NULL DEFAULT NULL COMMENT '定时模式定时器1使能：\r\n0：禁止 disable\r\n1：使能 enable',
|
||||
`timer_able2` smallint NULL DEFAULT NULL COMMENT '定时模式定时器2使能：\r\n0：禁止 disable\r\n1：使能 ',
|
||||
`timer_open1` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_close1` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_open2` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_close2` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_open` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_close` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_delay` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`presource` smallint NULL DEFAULT NULL COMMENT '触发压力源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure',
|
||||
`battery_voltage` decimal(10, 2) NULL DEFAULT NULL COMMENT '电池电压：单位V, *100',
|
||||
`op_mode` smallint NULL DEFAULT NULL COMMENT '运行模式：\r\n0： 手动模式 hand_mode\r\n1：定时器模式 timer_mode\r\n2：计时器模式 t2mode\r\n3：压力模式 pressure_mode\r\n4：柱塞模式 piston_mode\r\n5：时压模式 tp_mode',
|
||||
`timer_able1` smallint NULL DEFAULT NULL COMMENT '定时模式定时器1使能：\r\n0：禁止 disable\r\n1：使能 enable',
|
||||
`timer_able2` smallint NULL DEFAULT NULL COMMENT '定时模式定时器2使能：\r\n0：禁止 disable\r\n1：使能 ',
|
||||
`timer_open1` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_close1` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_open2` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timer_close2` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_open` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_close` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`timing_delay` varchar(10) NULL DEFAULT NULL COMMENT '时0~23：分0~59：秒0~59',
|
||||
`presource` smallint NULL DEFAULT NULL COMMENT '触发压力源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure',
|
||||
`pressure_open` decimal(10, 2) NULL DEFAULT NULL COMMENT '开井压力：单位Mpa，*100',
|
||||
`pressure_close` decimal(10, 2) NULL DEFAULT NULL COMMENT '关井压力： 单位Mpa，*100',
|
||||
`trigger_type` smallint NULL DEFAULT NULL COMMENT '压力触发类型：\n0：大于开井压力开井、小于关井压力关井 gre_less\n1：大于开井压力开井、大于关井压力关井 gre_gre\n2：小于开井压力开井、小于关井压力关井 less_less\n3：小于开井压力开井、大于关井压力关井 less_gre',
|
||||
`stability_time` int NULL DEFAULT NULL COMMENT '传感器压力稳定时间：秒',
|
||||
`max_open_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`max_close_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`min_open_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`min_close_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`prespro_tect` smallint NULL DEFAULT NULL COMMENT '开井压力保护使能：\r\n0：禁止 disable\r\n1：使能 enable',
|
||||
`prespro_source` smallint NULL DEFAULT NULL COMMENT '开井压力保护源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure',
|
||||
`trigger_type` smallint NULL DEFAULT NULL COMMENT '压力触发类型：\n0：大于开井压力开井、小于关井压力关井 gre_less\n1：大于开井压力开井、大于关井压力关井 gre_gre\n2：小于开井压力开井、小于关井压力关井 less_less\n3：小于开井压力开井、大于关井压力关井 less_gre',
|
||||
`stability_time` int NULL DEFAULT NULL COMMENT '传感器压力稳定时间：秒',
|
||||
`max_open_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`max_close_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`min_open_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`min_close_well` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`prespro_tect` smallint NULL DEFAULT NULL COMMENT '开井压力保护使能：\r\n0：禁止 disable\r\n1：使能 enable',
|
||||
`prespro_source` smallint NULL DEFAULT NULL COMMENT '开井压力保护源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure',
|
||||
`open_well_limit_max` decimal(10, 2) NULL DEFAULT NULL COMMENT '开井压力限制上限：单位MPa *100',
|
||||
`open_well_limit_min` decimal(10, 2) NULL DEFAULT NULL COMMENT '开井压力限制下限：单位MPa *100',
|
||||
`plug_init_status` smallint NULL DEFAULT NULL COMMENT '柱塞模式初始气井状态：\r\n0：关井 close_well\r\n1：开井 open_well',
|
||||
`plug_sustain_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`plug_close_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_init_status` smallint NULL DEFAULT NULL COMMENT '时压模式初始气井状态：\r\n0：关井 close_well\r\n1：开井 open_well',
|
||||
`tp_open_source` smallint NULL DEFAULT NULL COMMENT '时压模式开井源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure\r\n4：时间 time_pressure',
|
||||
`tp_open_trigger` smallint NULL DEFAULT NULL COMMENT '时压模式开井压力触发模式：\r\n0：大于压力触发\r\n1：小于压力触发',
|
||||
`tp_open_pressure` smallint NULL DEFAULT NULL COMMENT '时压模式开井压力',
|
||||
`tp_open_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_close_source` smallint NULL DEFAULT NULL COMMENT '时压模式关井源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure\r\n4：时间 time_pressure',
|
||||
`tp_close_trigger` smallint NULL DEFAULT NULL COMMENT '时压模式关井压力触发模式：\r\n0：大于压力触发 max_pressure\r\n1：小于压力触发 min_pressure',
|
||||
`tp_close_pressure` smallint NULL DEFAULT NULL COMMENT '时压模式关井压力',
|
||||
`tp_close_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_stability_time` smallint NULL DEFAULT NULL COMMENT '时压模式压力稳定时长：秒',
|
||||
`plug_init_status` smallint NULL DEFAULT NULL COMMENT '柱塞模式初始气井状态：\r\n0：关井 close_well\r\n1：开井 open_well',
|
||||
`plug_sustain_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`plug_close_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_init_status` smallint NULL DEFAULT NULL COMMENT '时压模式初始气井状态：\r\n0：关井 close_well\r\n1：开井 open_well',
|
||||
`tp_open_source` smallint NULL DEFAULT NULL COMMENT '时压模式开井源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure\r\n4：时间 time_pressure',
|
||||
`tp_open_trigger` smallint NULL DEFAULT NULL COMMENT '时压模式开井压力触发模式：\r\n0：大于压力触发\r\n1：小于压力触发',
|
||||
`tp_open_pressure` smallint NULL DEFAULT NULL COMMENT '时压模式开井压力',
|
||||
`tp_open_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_close_source` smallint NULL DEFAULT NULL COMMENT '时压模式关井源：\r\n0：油压 oil_pressure\r\n1：套压 cas_pressure\r\n2：输压 pre_pressure\r\n3：差压 diff_pressure\r\n4：时间 time_pressure',
|
||||
`tp_close_trigger` smallint NULL DEFAULT NULL COMMENT '时压模式关井压力触发模式：\r\n0：大于压力触发 max_pressure\r\n1：小于压力触发 min_pressure',
|
||||
`tp_close_pressure` smallint NULL DEFAULT NULL COMMENT '时压模式关井压力',
|
||||
`tp_close_time` varchar(10) NULL DEFAULT NULL COMMENT '时0~999：分0~59：秒0~59',
|
||||
`tp_stability_time` smallint NULL DEFAULT NULL COMMENT '时压模式压力稳定时长：秒',
|
||||
PRIMARY KEY (`id`) USING BTREE,
|
||||
UNIQUE INDEX `udx_device_create_time` (`device_id` ASC, `collection_time` ASC) USING BTREE COMMENT '设备采集数据唯一键'
|
||||
) ENGINE = InnoDB COMMENT = 'KNPC设备ID：$DeviceId$的采集数据'
|
||||
|
|
@ -9,56 +9,58 @@ INSERT INTO `$TableName$` (`id`, `device_id`, `created_time`, `collection_time`,
|
|||
`open_well_limit_max`, `open_well_limit_min`, `plug_init_status`, `plug_sustain_time`,
|
||||
`plug_close_time`, `tp_init_status`, `tp_open_source`, `tp_open_trigger`,
|
||||
`tp_open_pressure`, `tp_open_time`, `tp_close_source`, `tp_close_trigger`,
|
||||
`tp_close_pressure`, `tp_close_time`, `tp_stability_time`)
|
||||
VALUES (?, ?, NOW(), ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
|
||||
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
|
||||
ON DUPLICATE KEY UPDATE receive_time=VALUES(receive_time),
|
||||
device_time=VALUES(device_time),
|
||||
run_mode=VALUES(run_mode),
|
||||
well_status=VALUES(well_status),
|
||||
plug_status=VALUES(plug_status),
|
||||
status_start_time=VALUES(status_start_time),
|
||||
status_end_time=VALUES(status_end_time),
|
||||
oil_pressure=VALUES(oil_pressure),
|
||||
cas_pressure=VALUES(cas_pressure),
|
||||
pre_pressure=VALUES(pre_pressure),
|
||||
pipe_pressure=VALUES(pipe_pressure),
|
||||
liquid_level=VALUES(liquid_level),
|
||||
temperature=VALUES(temperature),
|
||||
humidity=VALUES(humidity),
|
||||
op_mode=VALUES(op_mode),
|
||||
timer_able1=VALUES(timer_able1),
|
||||
timer_able2=VALUES(timer_able2),
|
||||
timer_open1=VALUES(timer_open1),
|
||||
timer_close1=VALUES(timer_close1),
|
||||
timer_open2=VALUES(timer_open2),
|
||||
timer_close2=VALUES(timer_close2),
|
||||
timing_open=VALUES(timing_open),
|
||||
timing_close=VALUES(timing_close),
|
||||
timing_delay=VALUES(timing_delay),
|
||||
presource=VALUES(presource),
|
||||
pressure_open=VALUES(pressure_open),
|
||||
pressure_close=VALUES(pressure_close),
|
||||
trigger_type=VALUES(trigger_type),
|
||||
stability_time=VALUES(stability_time),
|
||||
max_open_well=VALUES(max_open_well),
|
||||
max_close_well=VALUES(max_close_well),
|
||||
min_open_well=VALUES(min_open_well),
|
||||
min_close_well=VALUES(min_close_well),
|
||||
prespro_tect=VALUES(prespro_tect),
|
||||
prespro_source=VALUES(prespro_source),
|
||||
open_well_limit_max=VALUES(open_well_limit_max),
|
||||
open_well_limit_min=VALUES(open_well_limit_min),
|
||||
plug_init_status=VALUES(plug_init_status),
|
||||
plug_sustain_time=VALUES(plug_sustain_time),
|
||||
plug_close_time=VALUES(plug_close_time),
|
||||
tp_init_status=VALUES(tp_init_status),
|
||||
tp_open_source=VALUES(tp_open_source),
|
||||
tp_open_trigger=VALUES(tp_open_trigger),
|
||||
tp_open_pressure=VALUES(tp_open_pressure),
|
||||
tp_open_time=VALUES(tp_open_time),
|
||||
tp_close_source=VALUES(tp_close_source),
|
||||
tp_close_trigger=VALUES(tp_close_trigger),
|
||||
tp_close_pressure=VALUES(tp_close_pressure),
|
||||
tp_close_time=VALUES(tp_close_time),
|
||||
tp_stability_time=VALUES(tp_stability_time)
|
||||
`tp_close_pressure`, `tp_close_time`, `tp_stability_time`, `battery_voltage`)
|
||||
VALUES (?, ?, NOW(), ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
|
||||
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) ON DUPLICATE KEY
|
||||
UPDATE receive_time=
|
||||
VALUES (receive_time), device_time=
|
||||
VALUES (device_time), run_mode=
|
||||
VALUES (run_mode), well_status=
|
||||
VALUES (well_status), plug_status=
|
||||
VALUES (plug_status), status_start_time=
|
||||
VALUES (status_start_time), status_end_time=
|
||||
VALUES (status_end_time), oil_pressure=
|
||||
VALUES (oil_pressure), cas_pressure=
|
||||
VALUES (cas_pressure), pre_pressure=
|
||||
VALUES (pre_pressure), pipe_pressure=
|
||||
VALUES (pipe_pressure), liquid_level=
|
||||
VALUES (liquid_level), temperature=
|
||||
VALUES (temperature), humidity=
|
||||
VALUES (humidity), battery_voltage=
|
||||
VALUES (battery_voltage), op_mode=
|
||||
VALUES (op_mode), timer_able1=
|
||||
VALUES (timer_able1), timer_able2=
|
||||
VALUES (timer_able2), timer_open1=
|
||||
VALUES (timer_open1), timer_close1=
|
||||
VALUES (timer_close1), timer_open2=
|
||||
VALUES (timer_open2), timer_close2=
|
||||
VALUES (timer_close2), timing_open=
|
||||
VALUES (timing_open), timing_close=
|
||||
VALUES (timing_close), timing_delay=
|
||||
VALUES (timing_delay), presource=
|
||||
VALUES (presource), pressure_open=
|
||||
VALUES (pressure_open), pressure_close=
|
||||
VALUES (pressure_close), trigger_type=
|
||||
VALUES (trigger_type), stability_time=
|
||||
VALUES (stability_time), max_open_well=
|
||||
VALUES (max_open_well), max_close_well=
|
||||
VALUES (max_close_well), min_open_well=
|
||||
VALUES (min_open_well), min_close_well=
|
||||
VALUES (min_close_well), prespro_tect=
|
||||
VALUES (prespro_tect), prespro_source=
|
||||
VALUES (prespro_source), open_well_limit_max=
|
||||
VALUES (open_well_limit_max), open_well_limit_min=
|
||||
VALUES (open_well_limit_min), plug_init_status=
|
||||
VALUES (plug_init_status), plug_sustain_time=
|
||||
VALUES (plug_sustain_time), plug_close_time=
|
||||
VALUES (plug_close_time), tp_init_status=
|
||||
VALUES (tp_init_status), tp_open_source=
|
||||
VALUES (tp_open_source), tp_open_trigger=
|
||||
VALUES (tp_open_trigger), tp_open_pressure=
|
||||
VALUES (tp_open_pressure), tp_open_time=
|
||||
VALUES (tp_open_time), tp_close_source=
|
||||
VALUES (tp_close_source), tp_close_trigger=
|
||||
VALUES (tp_close_trigger), tp_close_pressure=
|
||||
VALUES (tp_close_pressure), tp_close_time=
|
||||
VALUES (tp_close_time), tp_stability_time=
|
||||
VALUES (tp_stability_time)
|
||||
Loading…
Reference in New Issue